• Voltage & Current Programmable Power Supplies

  • PAE800 Series

    Features

    • Universal AC Input with active PFC
    • Programmable Output Volatge (0%-105%)
    • Programmable Output Current (0%-105%)
    • High Efficiency up to 93%
    • +5V/0.5A or +8V/0.3A Auxiliary Output
    • Intelligent LED Indicators
    • 1U profile, High Power Density
    • Forced current sharing for parallel operation
    • Power OK signal (Power good, logic low)
    • Remote ON/OFF, Remote Sense function
    • OVP, OLP, OTP, SCP Fan Failure Protections
    • Constant Current Limiting
    • Optional RS232 Function
    • Built-in I²C Serial Data Bus
    00 Watts, 12V, 15V, 24V, 30V, 36V, 48V & 60VDC Outputs, Programmable Output Voltage & Current (0-105%), Universal AC Input, PFC, I"C Serial Data Bus, Optional RS232, 1U Profile

    Inquiry Info. PDF

  • PAE1500 Series

    Features

    • Universal AC Input with active PFC
    • Programmable Output Volatge (0%-105%)
    • Programmable Output Current (0%-105%)
    • Constant Current Limit
    • +5V/0.5A or +9V/0.3A Auxiliary Output
    • Forced current sharing for parallel operation
    • Power OK signal
    • Remote ON/OFF, Remote Sense function
    • OVP, OLP, OTP, Fan Failure Protections
    • Global Control via RS232
    • Remote Setting multiple PSU via RS232, RS485 & I²C
    1500 Watts; 12V, 15V, 24V, 30V, 36V, 48V & 60VDC Outputs; Programmable Output Voltage (0-105%) & Output Current (0-105%); Universal AC Input Voltage Range; Active PFC; Control via RS232, RS485 & I²C Serial Bus

    Inquiry Info. PDF

  • PEK3000HV Series

    Features

    • Universal AC Input/ Full Range
    • Programmable Output Voltage (0%-105%)
    • Programmable Output Current (0%-105%)
    • Constant Current Limit
    • Intelligent LED Indicators
    • Forced current sharing for parallel operation
    • Power OK signal (Power good, logic low)
    • Remote ON/OFF, Remote Sense function
    • OVP, OLP, OTP, SCP, Fan Failure Protections
    • Selectable +5V/0.5A or +9V/0.3A Auxiliary Output
    • Global control via RS232
    • Remote Setting Multiple PSU's via RS232, RS485 & I²C

    Inquiry Info. PDF

  • CT Series RS232 Interface

    Features

    • Supports PAE and PEK Series Programmable power supplies (not PAK Series)
    • Support max. 8 unit serial or parallel control function
    • Support RS232/485 protocol
    • Easy installation for serial or parallel control.

    Specification

    • Input Voltage: 5Vdc
    • Operating Temperature Range: -10℃ ~ 60℃
    • Storage Temperature Range: - 30℃ ~ 70℃
    • Baud rate: 4800, N, 8, 1
    • Connector: DB-9F fo RS232, RJ-11 (6P4C) for RS485
    • Optical Isolation: I/P - O/P: 2500Vac rms for 1 minute

    Inquiry Info. PDF

  • Easy Charge Wizard

    Features

    • Memorize charging curve setting
    • Programmable charger solution (higher flexibility for different type of batteries)
    • High Voltage / Current charging requirement
    • LED to show different charging status
    • The software can automatically detect the model name connected, and allow user to control the output voltage and current within supported spec. and select the suitable battery type.
    • Protection: Overvoltage (This function is to protect the battery, and user may select to enable or disable this function. Please refer to section 4-2 for setting info.)

    Inquiry Info. PDF

Total of 5 results